Find Distributor

Press Room | Kester

Kester will be exhibiting at SMTA Dallas Expo & Forum (booth #416) on Tuesday, March 7 at the Plano Centre in Plano, TX. On Thursday, March 9 Kester will exhibit again at the SMTA Houston Expo & Tech Forum (booth #64) which will take place at the Stafford Centre in Stafford, TX.

[Read the rest of this article...]

Kester was awarded Circuit Assembly’s 2017 New Product Introduction (NPI) Award in the category of Flux for SELECT-10™ Selective Solder Flux. The award was presented during the IPC APEX EXPO 2017.

[Read the rest of this article...]

Kester will be exhibiting (booth #2205) at IPC APEX Expo 2017, which will take place February 14-16 at the San Diego Convention Center. Kester’s booth will offer attendees the opportunity to meet with the R&D and sales teams, and learn more about Kester’s new products.


[Read the rest of this article...]

Kester will be presenting at the IPC-SMTA Cleaning and Conformal Coating Conference: Building Reliable Hardware, which will take place October 25-27, 2016 at the Hyatt Rosemont, in Rosemont, IL.

[Read the rest of this article...]

Kester will be part of a free live webinar, “QFN: Design - Cleaning - Reliability: What you can't see can cause failure!”, on Thursday, October 13. Kester’s Global R&D Director, Bruno Tolla, Ph.D., will be a panelist in partnership with Kyzen, Plexus and STI Electronics.

[Read the rest of this article...]

Kester will be exhibiting (booth #39) at the SMTA Guadalajara Expo Forum 2016, which will take place October 5-6 at the Hotel RIU in Guadalajara.

[Read the rest of this article...]

Kester is proud to announce the launch of our new website. Please visit our upgraded website, which provides a responsive and overall more user friendly experience for all visitors, at www.kester.com.

[Read the rest of this article...]

Kester will be exhibiting (booth #500) at Surface Mount Technology Association International (SMTAI) 2016, which will take place September 27-28 at the Donald Stephens Convention Center in Rosemont, IL.

[Read the rest of this article...]

Kester is proud to announce that NP545, a zero-halogen, lead-free, no-clean solder paste designed for consistency and repeatability has undergone additional testing and now has a one year unrefrigerated shelf life with no print or solderability degradation. The paste is also fully capable of printing and reflowing 01005 components, even in air reflow, with minimal graping behavior. NP545 is classified as ROL0 per IPC J-STD-004B.

[Read the rest of this article...]

Kester hosted an Advanced Selective Soldering Process Seminar, on June 28 at their Global Headquarters in Itasca, IL.


[Read the rest of this article...]

Page 4 of 6First   Previous   1  2  3  [4]  5  6  Next   Last