Find Channel Partner

Knowledge Base | Kester

Within the Knowledge Base you will find a wealth of information about processing materials and process information on solder and other assembly materials.

Advanced Assembly Materials

Reflow Encapsulants

Download presentation on anti-collapse reflow encapsulant technology for flip chip on flex.


Development Aspects for Single Pass High Reliability FC Reflow Encapsulants

A summary of developmental work done in the field of single pass high reliability Flip Chip Reflow Encapsulants.

Alloys

Alloy Properties

Strength properties of some of the more common alloys. Shear strength, tensile strength and density values for some of the common alloys. Additional alloy properties including information on conductivity, brinell, hardness, elastic modulus, surface tension.


2% Silver

When a silver alloy is recommended. The 2% silver is required when soldering to silver or silver plated components/leads. The small percent of silver in the solder prevents the silver on the leads from migrating into the solder resulting in a weak or brittle solder connection.


Dross

What is dross? Dross is an oxide that is formed of the tin and lead in the solder. Dross is generated by a combination of heat and agitation. The hotter the solder pot is, the faster the dross is generated. Also, the more agitation the solder sees, the more dross will be formed. A nitrogen blanket will prevent oxygen from reaching the surface of the solder and the dross generation will be greatly diminished or eliminated. There are also chemical dross reducing agents such as the Kester #5744 Dross Eliminator. These chemical compounds react with the tin and lead oxides reducing them back to the base metal and releasing the oxygen to the air. Follow the instructions on the Product Data Sheet when using chemical reducing agents.


Sn60 vs. Sn63

When is the use of one of these two alloys more appropriate than the other? The Sn60Pb40 has a plastic range and puts down a slightly thicker coating of solder. Sn60 is often preferred for lead tinning and other solder coating applications. Sn63Pb37 is eutectic and as such has no plastic range. Generally it flows better than the Sn60 and is the preferred alloy for wave soldering and surface mount applications.


Gold Colored Solder

Assemblers are often concerned when they see a gold color on the surface of a solder pot. The gold color is tin oxide. When the surface of the molten solder is exposed to air it oxidizes and turns gold; sometimes the tin oxide is a purple-blue color. This is normal and can only be prevented by using an anti-oxidant powder or pellet. The discoloration is a cosmetic defect and in no way degrades the reliability of the solder. Kester offers the #5744 Dross eliminator for this purpose.


Solder Analysis Program (SAP)


Microstructural Evolution and Mechanical Behavior of High Temperature Solders: Effects of High Temperature Aging

Click here to purchase paper.


Effect of Ge addition on wettability, copper dissolution, microstructural and mechanical behavior of SnCu–Ge solder alloy

Click here to purchase paper.


A Study of Overcoming Solder Icicling and Copper Wire Dissolution in an Automated Lead-Free Soldering

This paper was published in the proceedings of SMTA International 2016 and can be found here. Download paper here.


Metallographic Preparation of Lead Free Solder

Download paper here.


Flux

Flux Residue Removal

Removing No-Clean Flux Residues

Suggestions of how to remove the residues from no-clean fluxes: To remove the residues of no-clean fluxes most solvents will work. The best results are achieved by removing the residues in an aqueous spray cleaner. The spray cleaner can be either a batch type or an in-line type. The addition of a saponifier (Kester # 5768) and hot water, about 130°F will completely remove the flux residues.


Removing Organic Acid (OA) Flux Residues

It is required to remove the residues of OA fluxes? You will get corrosion if you do not fully remove all the flux residues. The flux residues from organic fluxes are hygroscopic, they contain organic acids and they may contain halides. Over time the residues will absorb moisture and the halides will become mobile and corrosive. This will lead to ‘catastrophic failure’ of the assembly in question. We recommend cleaning with an aqueous cleaning system, it can be either batch type or in-line. The water temperature should be between 120-140°F. The important thing is to have lots of rinsing and flushing to completely remove all the flux residues.


White Residue

Identification and categorization of white residues often found on cleaned circuit assemblies.
Download Article


Flux Thinning

Soldering fluxes lose solvent and need additions of thinner. Flux is composed of solids dissolved in a solvent base. Over time the solvent evaporates. As the solvent evaporates the solids concentrate and eventually crystallize out. You will need to add thinner on a regular basis to prevent the flux from crystallizing. A hydrometer is used to measure the specific gravity of the flux. Normally the specific gravity (density) is checked 2 or 3 times a day. Thinner is then added to return the flux to its correct density. Hydrometers can be purchased from any scientific supply house. Kester has flux density control Data Sheets (also called nomographs) for the rosin and higher solid content fluxes. Using the nomograph you can determine how much thinner needs to be added. We sell test kits for the low residue fluxes. The test kits indicate how much thinner to add to the flux pot.


What Does No-Clean Mean?

There is some apprehension at the description, ‘no-clean’. What does it mean? The flux category called “no-clean”. Many fluxes fall into this category because the flux residues are not harmful to assemblies. It does not mean there will be no residues. All fluxes leave residues (the solids are the active portion of the flux that does all the work). Some flux residues are conductive or corrosive and must be removed. Other fluxes like the no-clean fluxes leave residues that do not need to be removed.


Flux Test Kit

The PS-22 Test Kit is an acid titration kit. As solvent evaporates, the acids in the flux become more and more concentrated. The kit is used to determine the acid number of the flux. The test is a simple drop test with an indicator for the endpoint (similar to a swimming pool test). You count the drops and then go to a chart. From the chart you determine how much thinner to add to bring the acid number back down to spec. Traditionally flux control is maintained by measuring the density of the flux and adding thinner as the flux thickens. This is a good method for fluxes with high solids contents. A slight change in density corresponds to a small change in the flux. The no-clean fluxes have low solids percents (typically 2 or 3 %) so a small change in the flux density could reflect the change in solids of 25-30%. This would put the acid level unacceptably high. The test kit is more accurate than using density measurements as a way to monitor the flux.


Rosin Flux

Rosin Flux Removal

Rosin flux residues are non-conductive and non-corrosive. Under normal circumstances they do not have to be removed from a printed circuit assembly. Rosin residue removal would be for cosmetic considerations. In an environment where the working temperature of the assembly will exceed 200°F the rosin residues will melt and become conductive, in these situations flux removal is required.

 

Saponification

Saponifiers in an aqueous cleaner can be used to remove rosin flux residues. What the Bio-Kleen #5768 saponifier does is react with the outside layer of flux and soften it up, literally turning it into a soap. You need a spray cleaner so that this soap layer will be washed away which then allows the Bio-Kleen to react with the next layer. Rinse that layer off, etc. The problem with ultrasonic removal is that the outer layer is slightly dissolved and that is the end of the reaction. In the meantime the solder is being exposed to an alkaline condition. The exposed solder turns a dull gray as the surface shine is etched off by the caustic solution.


Thinner Calculation

A calculation that can be used to determine how much thinner needs to be added to the flux to maintain a specified specific gravity. The following formula can be used to determine how much Kester # 4662 thinner to add to the Kester # 2235 flux to bring it back to the recommended specific gravity (density). For your information this formula can be used for any Kester flux that utilizes the # 4662 thinner. V = ( x – y ) 128 Y – 0.783 Where V = ounces of # 4662 thinner to be added per gallon of flux. X = present flux density Y = desired flux density For example: The flux is at 0.875 and it should be at 0.856 V = ( 0.875-0.856 ) 128 or V = 2.432 or V = 33.3 ounces of thinner per gallon of flux 0.856 – 0.783 .073


Alcohol-based flux wave soldering profile

A general profile setting up a wave solder machine to optimize reflow using an alcohol base flux.
Download Article


Green Corrosion?

Rosin fluxes react with copper (especially on braided cables underneath the insulation) to form a green by-product that is not corrosion.
Download Article


Water-Soluble (OA) Flux

Thinner Calculation

A calculation that can be used to determine how much thinner needs to be added to the flux to maintain a specified specific gravity. The following formula can be used to determine how much Kester # 4662 thinner to add to the Kester # 2235 flux to bring it back to the recommended specific gravity (density). For your information this formula can be used for any Kester flux that utilizes the # 4662 thinner. V = ( x – y ) 128 Y – 0.783 Where V = ounces of # 4662 thinner to be added per gallon of flux. X = present flux density Y = desired flux density For example: The flux is at 0.875 and it should be at 0.856 V = ( 0.875-0.856 ) 128 or V = 2.432 or V = 33.3 ounces of thinner per gallon of flux 0.856 – 0.783 .073


Removing OA Flux Residues

Is it required to remove the residues of OA fluxes? You will get corrosion if you do not fully remove all the flux residues. The flux residues from organic fluxes are hygroscopic, they contain organic acids and they may contain halides. Over time the residues will absorb moisture and the halides will become mobile and corrosive. This will lead to ‘catastrophic failure’ of the assembly in question. We recommend cleaning with an aqueous cleaning system, it can be either batch type or in-line. The water temperature should be between 120-140°F. The important thing is to have lots of rinsing and flushing to completely remove all the flux residues.


How To Test Outdated Flux

This method is to test performance of flux and it is in no way a method used to re-certify, by Kester, flux that had passed its shelf life. Download Article


Hand Soldering

How To Test Outdated Wire

This document is to be used by our customer to determine if the outdated wire in accordance with Kester’s shelf life is still a workable product. This is not a procedure to suggest the wire has been re-certified by Kester. It is simply a means to see if the wire still performs to the customer’s needs. Download Article


Lead-Free Hand Soldering – Ending the Nightmares

Hand soldering with lead-free solders can be challenging but not if the points in this article are understood.
Download Article


Case Study on the Validation of SAC305 and SnCu-based Solders in SMT Wave and Hand Soldering

This paper describes the work done at a contract assembler who implemented a successful process to build over 500,000 assemblies using both Kester K100LD and SAC305 solders.
Download Article


Hand Soldering Short Course

This paper describes the tools and process to properly hand solder.
Download Article

Lead-Free

Lead-Free Reflow Profile

Recommended reflow profile for Kester solder paste formulations containing the Sn96.5Ag3.5 and Sn96.5Ag3.0Cu0.5 alloys.
Download Article


K100LD & K100 Case Studies Summary

This PowerPoint pictorial examines a successful implementation of K100LD and K100 lead-free alloys at SMT Dynamics and Ayrshire Electronics.
Download Article


Lead-Free Technical Papers

How do you create a RoHS Compliancy-Lead-Free Roadmap?

This article describes the various considerations in the transition to lead-free but also RoHS compliancy.
Download Article


Standard Reflow Profile

The recommended reflow profile for Kester solder pastes manufactured with standard tin/lead alloys.
Download Article


K100 Implementation at SMT Dynamics

This paper shows results obtained at a contractor in successful builds using SAC305 for reflow soldering and K100 solder for wave assembly.
Download Article


Developing a Reliable Lead-free SMT Assembly Process

This article offers valuable information to be used during the successful lead-free reflow process implementation.
Download Article


How do you create a RoHS Compliancy-Lead-free Roadmap?

This article describes the various considerations in the transition to lead-free but also RoHS compliancy.
Download Article


How do you ready a solder pot for lead-free solder?

This article in designed for those cleaning a leaded solder pot to convert it to lead-free solder. It insures the solder is not contaminated with lead during the switchover.
Download Article


Implementation of Reliable Lead-free Wave and SMT Processes

This article describes the points to consider in transitioning to lead-free wave and reflow soldering.
Download Article


Lead-free Hand Soldering – Ending the Nightmares

Hand soldering with lead-free solders can be challenging but not if the points in this article are understood.
Download Article


Lead-free Reliability – Building it right the First Time

This article describes the comparison done in reference to lead-free and leaded solder joints. The article also gives insight on the points to improve overall reliability with lead-free solders.
Download Article


Lead-free SMT Soldering Defects How to Prevent Them

This paper shows how avoid soldering defects with lead-free solder pastes. Process control is emphasized to reduce defects.
Download Article


Lead-free Wave Soldering

This article shows the impact to wave soldering with lead-free materials and how to create a reliable defect free process.
Download Article


Creating Solder Joint Reliability with SnCu Based Solders

Tin-copper systems with lead-free wave and selective soldering are a growing option. This paper shows how to implement a reliable process using K100LD SnCu based solders.
Download Article


Tin-copper based solder options for lead-free assembly

This article details the process changes associated with K100LD solder systems.
Download Article


Case Study on the Validation of SAC305 and SnCu-based Solders in SMT Wave and Hand Soldering

This paper describes the work done at a contract assembler who implemented a successful process to build over 500,000 assemblies using both Kester K100LD and SAC305 solders.
Download Article

Reflow Profiling

Standard Reflow Profile

The generic reflow profile for leaded and lead-free products.

Reliability

Low-Component Standoff Reliability

Download Article


Impact of Reflow and Cleaning Conditions on the Electrochemical Activity of Flux Residues under Surface Mount Components

This paper was originally published in the proceedings of the Contamination, Cleaning & Coating Conference, Amsterdam, Netherlands, May 22-24, 2017. Download paper here.


Development of a Risk Profile from Flux Residues Trapped Under Leadless Components

This paper was was presented at the 2017 South East Asia Technical Conference on Electronics Assembly. Download paper here.


Electrochemical Methods to Measure the Corrosion Potential of Flux Residues

This paper was presented at the IPC APEX 2017 conference. Permission to re-print must be obtained from the author. Download paper here.


Surface Insulation Resistance of No-clean Flux Residues Under Various Surface Mount Components

This paper was originally presented at SMTA International 2016 and can be found in the proceedings here or here.


IPC-SMTA Cleaning and Conformal Coating Conference: Building Reliable Hardware

Download Presentation


Global SMT & Packaging QFN: Design – Cleaning – Reliability: What you can’t see can cause failure! Webinar

Recorded Webinar


Reactivity of No-Clean Flux Residues trapped under Bottom Terminated Components can Cause Leakage Currents to Form

This paper was also published in the proceedings of SMTA International 2016 and can be found here. Download paper here


Why Clean a No-Clean Flux

These papers are also published in the proceedings of International Conference on Soldering & Reliability 2016 and can be found here. Download paper here.


Reactivity of No-Clean Flux Residues in Electronic Assemblies: A Systematic Study

This paper was originally presented at SMTA International 2015. Download paper here.


IPC APEX 2015

Interview with RealTime


Chemical Influences on the Reliability of Complex Assemblies

This paper was originally presented at SMTA South East Asia 2015. Download paper here.


2014 IPC Europe High Reliability Forum

Presentation

Effect of Flux Systems on Electrochemical Migration of Lead-Free Assembly

This paper was originally presented at SMTA International 2014. Download paper here.

Surface Insulation Resistance of No-clean Flux Residues Under Various Surface Mount Components

This paper was also published in the proceedings of SMTA International 2016 and can be found here. 

Download paper here.

Selective Soldering

How to Use the Right Flux for the Selective Soldering Application

Download Article

How To Collect a Solder Sample From a Solder Pot for Testing

Download Article

Shelf Life

Shelf Life and Warranty Period Policies

The shelf life and warranty period policies for Kester’s solders and other non-chemical products can be found here.

Solder Paste

No-Clean Solder Paste

What Does No-Clean Mean? Many fluxes fall into this category because the flux residues are not harmful to assemblies. It does not mean there will be no residues. All fluxes leave residues (the solids are the active portion of the flux that does all the work). Some flux residues are conductive or corrosive and must be removed. Other fluxes like the no-clean fluxes leave residues that do not need to be removed.


Organic Acid (Water-Soluble) Solder Paste

It is required to remove the residues of OA fluxes? You will get corrosion if you do not fully remove all the flux residues. The flux residues from organic fluxes are hygroscopic, they contain organic acids and they may contain halides. Over time the residues will absorb moisture and the halides will become mobile and corrosive. This will lead to ‘catastrophic failure’ of the assembly in question. We recommend cleaning with an aqueous cleaning system, it can be either batch type or in-line. The water temperature should be between 120-140°F. The important thing is to have lots of rinsing and flushing to completely remove all the flux residues.


10 Solder Tips

Tips for successfully soldering surface mount applications.
Download Article


SMT Process Recommendations

Key competitive advantages can be obtained through the minimization of process defects and disruptions. In today’s electronic manufacturing processes there are many variables to optimize.
Download Article


Solder Beads

What are solder beads? Why do they appear on SMT assemblies? What you can do to minimize their presence?
Download Article


Solder Paste Handling

This document will explain how to handle solder paste after it leaves Kester's facilities.

Download Article


When Does "Low" Become Too Low?

Download Article

Voiding under Non-BGA's

Download Article

Lead-Free SMT Soldering Defects How to Prevent Them

This paper shows how avoid soldering defects with lead-free solder pastes. Process control is emphasized to reduce defects.
Download Article


Developing a Reliable Lead-free SMT Assembly Process

This article offers valuable information to be used during the successful lead-free reflow process implementation.
Download Article


How do you create a RoHS Compliancy-Lead-free Roadmap?

This article describes the various considerations in the transition to lead-free but also RoHS compliancy.
Download Article


Case Study on the Validation of SAC305 and SnCu-based Solders in SMT Wave and Hand Soldering

This paper describes the work done at a contract assembler who implemented a successful process to build over 500,000 assemblies using both Kester K100LD and SAC305 solders.
Download Article


Graping - What, Why and How to Eliminate?

Download Article

Taking End Application Environment Into Consideration with No-Clean Chemistries

Download Article

Breaking Through Flux Residues to Provide Reliable Probing on PCBAs

Download Paper

This paper is also published in the proceedings of SMTA International 2016 and can be found here.


Rheology Behavior of Flux and Solder Paste

This paper was published in the proceedings of SMTA International 2017 and can be found here.

Solderability

Soldering to Gold (Sn63Pb37 Alloy)

When soldering to a gold plated surface the thickness of the gold is important. If the gold is thicker than 40-50 micro-inches, the solder most likely may not dissolve all the gold and bond to it. The solder will be dull looking and, if the gold content in the solder exceeds about 5%, the solder joint will be brittle. If the gold is thin, less than 20 micro-inches, it easily dissolves into the solder, making the solder joint look grainy. If the metal that was under the gold is not oxidized, the gold-contaminated solder will bond to it. However, as gold plates usually in a columnar structure, the gold should be at least 10 micro-inches thick to protect the base metal (in most cases nickel) from oxidation.
Download Article


Soldering to stainless steel

Stainless steel is a difficult metal to solder to.
Download Article


2% Silver

When is a silver alloy is recommended? The 2% silver is required when soldering to silver or silver plated components/leads. The small percent of silver in the solder prevents the silver on the leads from migrating into the solder resulting in a weak or brittle solder connection.


Soldering to Aluminum

Aluminum is an extremely difficult metal to solder to. Kester does not have any products for soldering to aluminum.


Soldering Thermocouple Wires

Thermocouple materials are not solderable. It is possible to surround the thermocouple wire (encapsulate it) with solder but you cannot make a metallurgical bond to it. It is important to note that even if you could solder the two wires back together the thermocouple still will not work. A thermocouple works by measuring the change in resistance of the two dissimilar metals joined in the welded bead. If one were to join the metals with a solder inter-connect the thermocouple would give meaningless numbers. The way to fix a broken thermocouple is to re-weld the thermocouple bead. If you wish to attach a thermocouple to a printed circuit board for reflow profiling, you can use a high temperature alloy to encapsulate it or use a cyano-acrylate adhesive to stick it to the board.


Questions About Solderability

Download Article


Creating Solder Joint Reliability with SnCu Based Solders

Tin-copper systems with lead-free wave and selective soldering are a growing option. This paper shows how to implement a reliable process using K100LD SnCu based solders.
Download Article


The Role of Organic Amines in Soldering Materials

This paper was originally presented at IPC APEX 2015. Download Paper


Smart Chemistry Towards Highly Efficient Soldering Material Formulation

This paper was originally presented at SMTA International 2014. Download Paper

Technical Papers

White Residue

This article discusses the identification and categorization of white residues often found on cleaned circuit assemblies.
Download Article


Developing a Reliable Lead-Free SMT Assembly Process

This article offers valuable information to be used during the successful lead-free reflow process implementation.
Download Article


How do you create a RoHS Compliancy-Lead-Free Roadmap?

This article describes the various considerations in the transition to lead-free but also RoHS compliancy.
Download Article


How do you ready a solder pot for lead-free solder?

This article in designed for those cleaning a leaded solder pot to convert it to lead-free solder. It insures the solder is not contaminated with lead during the switchover.
Download Article


Lead-Free SMT Soldering Defects How to Prevent Them

This paper shows how avoid soldering defects with lead-free solder pastes. Process control is emphasized to reduce defects.
Download Article


Lead-Free Wave Soldering

This article shows the impact to wave soldering with lead-free materials and how to create a reliable defect free process.
Download Article


Case Study on the Validation of SAC305 and SnCu-based Solders in SMT Wave and Hand Soldering

This paper describes the work done at a contract assembler who implemented a successful process to build over 500,000 assemblies using both Kester K100LD and SAC305 solders.
Download Article

Wave Soldering

Wave Soldering Guideline

Important process parameters to consider when setting up a wave soldering process.
Download Article


Alcohol-Based Flux Wave Soldering Profile

A general profile setting up a wave solder machine to optimize reflow using an alcohol-based flux.
Download Article


VOC-Free Flux Wave Soldering Profile

A general profile setting up a wave solder machine to optimize reflow using an alcohol-based flux.
Download Article


Effects of Metallic Impurities on the Wetting Properties of Solder

Effects that small amount of metallic impurities can have on the wetting properties of solder in a wave solder machine.
Download Article


VOC-Free Flux Considerations

Process changes that will have to be considered when changing from an alcohol based to a VOC-free flux technology.
Download Article


Flux Deposition

How much no-clean flux should be applied to a PCB and how does one determine the deposition rate?
Download Article


Implementation of Reliable Lead-free Wave and SMT Processes

This article describes the points to consider in transitioning to lead-free wave and reflow soldering.
Download Article


Lead-free Wave Soldering

This article shows the impact to wave soldering with lead-free materials and how to create a reliable defect free process.
Download Article


Case Study on the Validation of SAC305 and SnCu-based Solders in SMT Wave and Hand Soldering

This paper describes the work done at a contract assembler who implemented a successful process to build over 500,000 assemblies using both Kester K100LD and SAC305 solders.
Download Article


How do you ready a solder pot for lead-free solder?

This article in designed for those cleaning a leaded solder pot to convert it to lead-free solder. It insures the solder is not contaminated with lead during the switchover.
Download Article


Lead-free Wave Soldering

This article shows the impact to wave soldering with lead-free materials and how to create a reliable defect free process.
Download Article


Creating Solder Joint Reliability with SnCu Based Solders

Tin-copper systems with lead-free wave and selective soldering are a growing option. This paper shows how to implement a reliable process using K100LD SnCu based solders.
Download Article


Tin-copper based solder options for lead-free assembly

This article details the process changes associated with K100LD solder systems.
Download Article


How To Collect a Solder Sample From a Solder Pot for Testing

Download Article

Solder Analysis Calculator

Download


Breaking Through Flux Residues to Provide Reliable Probing on PCBAs

This paper was published in the proceedings of SMTA International 2016 and can be found here. Download paper here.